Category: Tools & Tips
Practical 3D printing tools & tips, troubleshooting guides, calibration tips, upgrade ideas, and workflow improvements to help beginners and experienced makers print better results with confidence.
What to Do With Bambu AMS Filament Poo: 5 Options Ranked for Your Setup
Bambu AMS generates more filament poo than most users realize. Here are 5 actual options — ranked by waste volume — for what to do with it right now.
Creality M1 & R1 Recycled Filament Tolerance: Will It Clog Your Printer?
Creality M1 & R1 recycled output has ±0.1mm tolerance — double the range of commercial filament. Here’s exactly what that means for Bambu AMS users, Ender owners, and where recycled filament is actually safe to use.
Creality M1 & R1 Filament Maker Indiegogo: Honest Breakdown for Bambu & Ender Users
The Creality M1 & R1 Indiegogo campaign is live. Here’s the honest breakdown — confirmed pricing, ±0.1mm tolerance reality, and exactly who should back it right now.
Sermoon P1 vs Renting/Outsourcing 3D Scans: Cost Breakdown 2026
Quick Answer If you’re deciding between buying a Sermoon P1, renting a 3D scanner, or outsourcing 3D scans, here’s the simplest (and most realistic) way to choose: Who this page is for In this page, a “usable scan” means…
Is a Filament Recycler Worth It? (M1/R1 ROI Calculator)
People love the idea of a filament recycler because it sounds like free money. Turn trash into spools. Beat the system. Save the planet. Whatever. Here’s the part nobody wants to hear: most buyers aren’t buying savings. They’re buying…
Bambu Lab P2S First Layer Not Sticking — Causes & Real Fixes (2026)
Here’s something most troubleshooting guides won’t tell you upfront: If your P2S first layer isn’t sticking, there’s roughly a 50/50 chance the fix is just washing your build plate with dish soap. Not wiping it with alcohol. Actually washing…
22 vs 7 vs 1 Laser Line Modes on the Creality Sermoon P1: What They Mean (and Which to Use)
Quick Answer Think of Creality Sermoon P1 22/7/1 as speed / detail / deep features—pick the mode based on the object’s geometry, not the size alone. If you’re a beginner: do a 22-line first pass, then switch to 7-line…
SparkX i7 First Setup & First Print: Beginner Quick Start (Self-Check + Auto Leveling)
Get your SparkX i7 ready for its first print with a beginner-friendly quick start. Includes first-time self-check expectations, PLA loading (spool/PTFE or CFS Lite), auto leveling, first-layer checks, and fast fixes.
Bambu Lab P2S First Layer Not Sticking? Fix Adhesion Fast
P2S First Layer Not Sticking When your Bambu Lab P2S first layer won’t stick, it’s tempting to start tweaking settings. That’s usually the mistake. Most adhesion failures come from a small set of root causes: the plate surface is…
Best Bambu Lab H2C Bundle to Buy: AMS Combo vs Ultimate vs Laser
Confused by H2C bundle names? This guide explains what each package actually adds, which bundle fits your needs (newbie, multi-material, small shop), what not to buy, and a must-have starter cart for smoother printing. You’ll also get a simple…
