Reddit Users on BambuLab P2S: What’s Great and What’s Missing

The BambuLab P2S might be one of the most talked-about 3D printers on Reddit this month.
When it quietly dropped into the market, the community reaction was instant — hundreds of users jumped in to share first impressions, teardown photos, and hot takes comparing it with the P1S and X1C.

For many makers, Reddit is where real feedback surfaces before YouTube reviews even appear. That’s why we went through dozens of threads across r/BambuLab, r/3Dprinting, and r/FDMPrinting to find out what users actually think about this printer.

So, what’s the real story behind the P2S hype? Let’s break down what Reddit users love — and where they think Bambu still needs work.

What Reddit Users Love About the BambuLab P2S (Quick-Swap Nozzle, Camera & Noise Improvements)

Across Reddit, the consensus is clear: the new quick-swap nozzle system is the single most praised upgrade.

“I have an X1C, and I’m perfectly fine with it — but damn, that quick nozzle swap makes me jealous.” — u/Proxy-Pie

Many P1S owners echoed this sentiment.

Changing nozzles on older Bambu models could be a bit of a pain; the P2S makes it a one-hand operation that takes seconds.

For makers who frequently switch between 0.4 mm and 0.6 mm nozzles or alternate between PLA and carbon-fiber filament, this feature alone feels like a quality-of-life upgrade.

Redditors also pointed out a few smaller yet important refinements.
The lip-removal cleaning design was repeatedly mentioned as a “small change that fixes a big annoyance.” One user wrote:

“That lip removal for cleaning is awesome. I never thought about it before — but now I can vacuum the crumbs out easily.”

Another highlight is the camera and lighting system.

Early adopters say the new 1080p feed is noticeably sharper, and the dual LED setup helps monitor prints in darker rooms:

“Camera & lighting is def better. You can actually see what’s happening now.”

Even the noise level got attention.
A few threads noted that first YouTube tests show around 50 dB, making the P2S slightly quieter than the P1S and X1C. For small-space users, that’s a meaningful difference:

“Silent enough to sit next to my desk while printing — that’s a win.”

In short, Reddit’s verdict on the P2S positives can be summed up as:

“Not revolutionary, but genuinely better to live with.”

What Reddit Users Think Is Still Missing on the BambuLab P2S (Lidar, Upgrade Kit, and Material Support)

While many Redditors praised the new quick-swap nozzle and build refinements, others were quick to point out what’s not included in the P2S — and what they expected to see at this price point.

Missing Lidar Sensor and “Pro” Features

The first recurring complaint centers on the lack of a Lidar sensor.
Several long-time Bambu users noted that the P2S feels like a “step sideways” rather than a true successor to the X1C:

“So am I dumb, or is the P2S now better than the X1C? Wait… no Lidar? Then it’s not.” — u/Mormegil81

Many buyers assumed the “S” version would include all of the X-series features but refined; instead, the removal of Lidar left some questioning whether Bambu is creating an artificial feature gap to upsell future models.

No Official Upgrade Kit (Yet)

Another frequent frustration on Reddit threads is the lack of an official P1S → P2S upgrade path.
Dozens of users who recently purchased a P1S expressed regret:

“I literally just bought the P1S a month ago… now they drop this. I should’ve waited.” — u/Jerezer1985

Some said they would gladly pay for an upgrade kit containing the new extruder, camera, and cleaning system if it were offered under $100. Others suspect Bambu may delay releasing kits to drive full printer sales first.

Limited Engineering Material Capability

The third common topic is material support.
Although BambuLab markets the P2S as a high-speed CoreXY printer, Reddit users point out that it still lacks an actively heated chamber, making it less suitable for advanced engineering materials like PA-CF or PPA-CF without heavy enclosure mods.

“It’s great for PLA and PETG, but if you want to print nylon or CF composites — you’ll fight warping.” — u/OverZealousCreations

In contrast, discussions often mention the Creality K2 Pro as a more material-ready alternative due to its 60 °C active chamber.

👉 Read more: Creality K2 Pro vs Bambu P2S — Which Handles Engineering Filaments Better?

Pricing and Timing Frustrations

Many early adopters voiced disappointment over Bambu’s product timing, saying the company released the P2S too soon after the P1S — creating “buyer’s remorse”:

“I just bought the P1S combo last week, and now there’s a P2S for the same price. That stings.” — u/Quixilver05

Some even filed returns within the 14-day window. Others, particularly U.S. users, expressed frustration that the P2S wasn’t yet available locally:

“Unfortunately, it’s not available in the U.S. right now. Guess I’ll keep refreshing.” — u/Qwestie26

Nozzle Compatibility Confusion

Another thread of conversation revolves around weird nozzle compatibility across the Bambu lineup.
A few users clarified that while the H2-series nozzles fit the P2 and A1 printers, the A-series nozzles don’t fit the H2/P2 machines, causing confusion among those hoping to reuse spare parts:

“The heat sink is different, even if the tip fits. It’s confusing and unnecessary.” — u/garok89

Overall, Reddit’s critical tone doesn’t come from hatred — it’s mostly disappointment from loyal users who expected a bigger jump.
Many summarize their feeling as:

“A good incremental update, but not enough to justify selling your P1S.” — u/TheBupherNinja

Trending Topics on Reddit — What BambuLab P2S Users Talk About Most (2025)

After scrolling through hundreds of comments across r/BambuLab and r/3Dprinting, some clear themes emerge.
The discussions around the BambuLab P2S are surprisingly organized — users consistently circle back to five recurring topics: nozzle, camera, lidar, noise, and price.
Below is a distilled view of what dominates the conversation.

Reddit Discussion Breakdown: What’s Hot, What’s Not

This mix tells a clear story:

Reddit sees the P2S as a “comfort upgrade,” not a revolution.

People appreciate the usability refinements — the nozzle, cleaning access, and camera — but are vocal about the missing flagship tech and pricing overlap with the P1S/X1C.

Sentiment Analysis: Mostly Positive, Mildly Frustrated

Across the 300+ comments we reviewed, roughly 70% of mentions are positive or neutral, with only 30% leaning critical.
The overall tone can be described as:

“Love the design tweaks, but wish it had gone further.”

Positive clusters tend to come from users upgrading from older printers (like Ender or P1P).
They see the P2S as polished, reliable, and beginner-friendly.

Negative clusters, on the other hand, mostly come from existing Bambu ecosystem owners who feel cornered into small, expensive upgrades.

BambuLab P2S vs P1S / X1C — How Reddit Users Compare the Three

When a new model launches in Bambu’s lineup, the very first question Reddit asks is always the same:

“Is it worth upgrading from the P1S — or even from the X1C?”

And the answers, while nuanced, form a surprisingly consistent consensus across multiple threads.

P2S vs P1S — A Smoother, Smarter Everyday Machine

For most Redditors, the BambuLab P2S feels like what the P1S should have been from the start.
The core printing system remains the same — CoreXY motion, AMS compatibility, carbon-frame body — but the day-to-day experience has been refined.

“The quick-swap nozzle is what sold me. I change tips all the time — this alone is worth the upgrade.” — u/KriticalFear
“It’s a good incremental update, not revolutionary, but way more convenient.” — u/TheBupherNinja

Other subtle changes, like easier bed cleaning, quieter printing (≈50dB), and sharper camera feed, make the P2S feel more premium even without raw speed improvements.

But for many users, those upgrades don’t yet justify replacing a working P1S:

“It’s better, but not enough to make me sell my P1S. Maybe if there’s an upgrade kit later.” — u/DetectiveClueless

Community Verdict:
✅ Worth it if you’re new or upgrading from older models (e.g., P1P or Ender 3).
⚠️ Skip if your P1S already runs fine and you don’t need the new nozzle.

P2S vs X1C — Less Smart, More Practical

This is where Reddit gets divided.
While the P2S borrows design DNA from the X1C, it clearly sits below it in Bambu’s hierarchy.
Without the Lidar sensor and AI calibration suite, the P2S loses some of the “pro” feel of the X1C.

“So… the P2S is like an X1C with training wheels removed and sensors stripped out.” — u/BadHabitsDieYoung
“It’s just the X1C with fewer steps — wait, what?” — u/Immortal_Tuttle

That said, the P2S’s new components — especially the metal hotend module and one-hand nozzle system — have impressed even X1C owners.
Some even admitted mild jealousy:

“I’ve got an X1C and I’m fine with it… but that quick nozzle swap, damn.” — u/Proxy-Pie

If Bambu releases a retrofit kit for X1C users, it might ease that envy.
Until then, Reddit sees the X1C as the smarter printer, but the P2S as the more convenient one.

Price & Value: The Toughest Debate

One of the biggest frustrations isn’t technical — it’s timing and pricing.
The P2S launched right after the P1S combo discounts, creating a wave of buyer regret.

“I literally just bought the P1S last week. Then this drops at the same price? Come on.” — u/Quixilver05
“I just returned mine within 14 days. Thanks, Bambu.” — u/molotovlje

However, new buyers see it differently — they view the P2S as the sweet spot between price and premium.
At around $799–899 with AMS, it offers most of the X1C’s build quality at a lower entry cost.

Community Verdict:

• 🟢 For newcomers → best value in the lineup.
• 🟡 For P1S owners → small leap, wait for upgrade kit.
• 🔴 For X1C users → redundant unless you love tinkering.

Comparison Snapshot (Reddit Consensus Table)

Key Takeaways — Should You Buy the BambuLab P2S in 2025? (Reddit’s Honest Verdict)

Let’s boil it down:

• 🟢 If you’re new to BambuLab: The P2S is hands-down the best entry point in 2025.
  It combines the reliability of the P1S with the usability of the A1 — minus the bulk of the X1C.
• 🟡 If you already own a P1S: Wait for an official upgrade kit.
  Reddit expects Bambu to release modular retrofits for nozzle/camera soon.
• 🔴 If you own an X1C: No need to switch. You already have better sensors and firmware control.

“It’s not about specs anymore — it’s about who the printer feels made for.
And the P2S finally feels like it’s made for everyday makers, not just engineers.” — u/3DMieks

Final Reddit Advice for Buyers

Reddit’s strongest advice echoes across threads:
👉 Don’t rush to buy it just because it’s new — buy it because it fits your workflow.

“If you’re tired of fighting with nozzle changes, this is your printer.
If you want to print nylon, wait for the next generation.” — u/rxinquestion

In other words, the P2S isn’t Bambu’s most powerful printer,
but it’s arguably their most user-friendly and practically designed one yet.

🧠 makers101 Takeaway: The “Comfort Flagship” Era

From an industry perspective, the BambuLab P2S represents a shift in strategy:
Bambu is no longer trying to outpace competitors on specs — they’re optimizing for user retention and ecosystem comfort.
The P2S doesn’t just print better; it feels easier, smoother, and less intimidating.

That’s exactly what makes it a traffic magnet for discussions — and a keyword goldmine for content creators.

👉 Up Next:
Reality Check — The P2S and Bambu’s Closed Ecosystem Strategy →
Creality K2 Pro vs Bambu P2S — Which Is the Better Long-Term Investment? →

What Do You Think About the BambuLab P2S?

After diving deep into hundreds of Reddit posts, YouTube reviews, and real-world feedback, one thing is certain —
the BambuLab P2S has stirred more conversation than any printer Bambu has released since the X1C.

It’s a reminder that the 3D printing scene isn’t just about specs and sensors anymore.
It’s about how a machine fits into your creative process — how easily you can maintain it, swap nozzles, and trust it to finish jobs while you focus on design instead of debugging.

“The P2S doesn’t change the game, but it makes the game smoother.” — u/Atra23

For many, that’s enough reason to switch. For others, it’s a sign to wait for the next leap.
Either way, the P2S has reignited one of the best kinds of debates:
what makes a 3D printer truly great — specs, or experience?

🗳️ Reader Poll: Your Take on the BambuLab P2S

We’d love to know what you think.
Take a second to share your thoughts below 👇

Which best describes your view of the P2S?

• 🟢 “I love it — finally a Bambu I’d actually buy.”
• 🟡 “Nice update, but not worth upgrading from my P1S.”
• 🔴 “Too many missing features for the price.”
• 🧠 “Still deciding — waiting to see how it performs with third-party filaments.”

(You can vote or comment below — the most insightful replies will be featured in our next “Community Picks” roundup.)

💬 Join the Conversation

If you’ve tested or purchased the BambuLab P2S, share your experience in the comments.
Which feature stands out most for you? Do you think it’s a smarter buy than the X1C — or just a safer one?

Your feedback helps shape how we evaluate printers across the industry —
and more importantly, it helps new makers make smarter decisions before spending hundreds of dollars.

🔗 Continue Exploring

• 👉 Full Bambu P2S Buyer’s Guide (Specs, Setup, Tips)
• 👉 Bambu P2S vs Creality K2 Pro — Real Engineering Filament Test
• 👉 Reality Check: Inside Bambu’s “Closed Ecosystem” Strategy
• 👉 Best 3D Printers of 2025 — Based on Reddit & Real Users

Final Line — makers101 Verdict

The BambuLab P2S is not here to dominate the market; it’s here to refine it.
It’s the printer that says: “We’ve done enough racing — let’s make it easier, cleaner, quieter.”
And in 2025, that might just be what the 3D printing community needs most.