The Bambu Lab P3C, a printer Bambu hasn’t announced, shows up in certification photos as an enclosed tool changer with seven tool docks across the front of the chamber. There is no price and no launch date.
The photos come from a Japanese radio certification record for model PF006-P, granted on Oct. 8, 2026. Bambu’s official teaser covers only the nine-tool H3C, which it will reveal on November 3.
Table of Contents
Where the Bambu Lab P3C Photos Actually Come From
Some coverage calls these “FCC photos.” They aren’t. The P3C’s FCC filing, granted Sept. 15, 2026, lists its external photos, internal photos and user manual as confidential, with a release date of March 14, 2027.
The pictures you’ve seen sit in Japan’s Giteki database, run by the Ministry of Internal Affairs and Communications (MIC). That record shows the same model number and a certification date of Oct. 8, 2026.
Its four-page external photo exhibit was prepared by Bay Area Compliance Laboratories, the lab that tested the printer. The US label drawing in that filing prints the same Japanese certificate number, 211-260730, next to the P3C name, so the two filings describe one machine.
What the Bambu Lab P3C Certification Photos Show
The tool rack is the headline. Behind the glass front door, seven docks with orange latches sit in a row near the top of the chamber, with a matching row of holders below them.
Other details visible in the exhibit:
- An enclosed gray body with “P3C” printed on the front panel
- A touchscreen at the top-left corner, raised above the body line
- One carriage riding on round rods, fed by a cable chain
- A textured build plate
- A rear panel with a power inlet and vent grilles
The photos leave out a lot. They show no lid, no AMS and no spec sheet, and from the outside you can’t tell whether each dock holds a full toolhead or only a hotend.
Test samples can also differ from retail units. The test report lists lab dates from Aug. 18 to Sept. 23, 2026.
| Bambu Lab P3C (as of Oct. 26, 2026) | What’s on record |
|---|---|
| Price | Not announced |
| Release date | Not announced |
| Model number | PF006-P |
| Tool docks | 7, visible in certification photos |
| Enclosure | Enclosed sides with a glass front door (no lid in the photos) |
| Wi-Fi | Dual-band: 2412-2462 MHz plus four 5 GHz bands between 5180 and 5825 MHz (FCC grant) |
| US label input | 100-120V, 8A |
| US certification | Sept. 15, 2026 |
| Japan Giteki certificate | 211-260730, Oct. 8, 2026 |
| Build volume | Not announced |
Bambu Lab P3C vs H3C and H2C: Where Seven Tools Fits
Seven docks put the P3C below the H3C, which Bambu has teased as a nine-tool changer. On paper it roughly matches the current H2C, which Bambu says prints up to seven materials using six induction hotends on its Vortek hotend-change system, plus a seventh nozzle. The photos don’t show whether the P3C also keeps a nozzle on its carriage.
My read: the P badge points to a cheaper tool changer for the mainstream line, the same tier as the P2S. That is an inference from the name alone. Seven tools already equals the H2C’s seven-nozzle count, so a P2S-level price is far from certain, and Bambu hasn’t said a word about P3C pricing.
No public filing states a build volume, and the exhibit has no spec sheet, so any size you see quoted is a guess.
What the Bambu Lab P3C Means for P1S, P2S and Snapmaker U1 Buyers
If you were about to buy a P2S for multicolor printing, waiting until Bambu’s November 3 event costs you little. If the P3C isn’t there, you’ve lost a week. Its price is unknown, though, and Bambu hasn’t said which AMS feeds seven tools, so it may not land at P2S money. Our Snapmaker U1 vs P2S comparison covers what a tool changer buys you on multicolor prints.
If you print mostly single-color parts, the P3C changes nothing for you. A P2S or an upgrade from the P1S still covers that job, and our Black Friday 3D printer deals roundup covers machines you can buy today.
If you’re weighing a Snapmaker U1, the P3C is the obvious Bambu rival on paper: four toolheads against seven docks. The H2C vs U1 breakdown covers how Bambu’s current swap system compares.
The case for waiting has a weak spot. Bambu has dated only the H3C reveal, and the P3C doesn’t appear on that teaser page. Filings from September and early October say the hardware exists. They say nothing about when you can order one.
Bambu Lab P3C FAQ
When will the Bambu Lab P3C be released?
Bambu hasn’t announced a date. The H3C reveal is set for November 3 at 9:00 AM EST, and the P3C isn’t mentioned on that page.
How many tools does the Bambu Lab P3C have?
The Japanese certification photos show seven tool docks behind the front door. Bambu hasn’t confirmed a tool count.
How much will the Bambu Lab P3C cost?
There is no official price. Any figure you see online is a guess, because no filing or Bambu page lists one.
What We Still Don’t Know About the Bambu Lab P3C
- Build volume and print speed
- Whether the docks hold complete toolheads or hotends only
- Which AMS units it works with, and whether the chamber is heated
- Price, regions and ship date
- Whether it launches alongside the H3C and its patented tool rack or later
November 3 should settle the H3C questions. For the P3C, the next hard date on record is March 14, 2027, when the US confidentiality window on its photos and manual runs out.
