I earn a commission if you buy through links on this page, at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
The QIDI Q3D, a new dual-nozzle 3D printer, launched at Formnext 2026 in Frankfurt on November 17. Pre-orders are open now on QIDI’s official store.
The list price is $599. A pre-order costs a $30 refundable deposit today plus a $499 balance later, which brings the total to $529. The smaller figure is just the balance.
Nothing has shipped yet.
How much does the QIDI Q3D cost?
Both the Q3D and the Q3D Combo are pre-order only. The full-price In Stock options are marked unavailable, and the only item you can add to the cart is the deposit. That is why the store page headline shows $30. The official breakdown for the standard Q3D:
| QIDI Q3D pre-order, QIDI US store (checked Nov 17, 2026, Pacific Time) | Amount |
|---|---|
| Regular price | $599 |
| Pre-sale discount | $100 off |
| Deposit paid today, fully refundable | $30 |
| Balance, paid when QIDI emails the link | $499 |
| Total you pay | $529 |
The store pitches this as a $100 saving. Because the deposit also counts toward what you pay, the net saving against list is $70. Check the breakdown on the QIDI Q3D pre-order page before you pay the deposit.
QIDI’s launch announcement mentions Black Friday, but the pre-sale terms do not call this a Black Friday price.
Image: QIDIQIDI Q3D Combo price
The Q3D Combo is $749 at the QIDI US store and pairs the Q3D with the QIDI BOX2. The Combo has its own deposit option. Its balance and total are unpublished, and the written pre-sale terms only cover the standard Q3D. Don’t assume the credit works the same way on the Combo yet.
| Q3D package, QIDI US store (checked Nov 17, 2026, Pacific Time) | Store price | Buyable now | Pre-order balance |
|---|---|---|---|
| Q3D | $599 | $30 deposit only | See above |
| Q3D Combo (with QIDI BOX2) | $749 | $30 deposit only | Not published by QIDI |
Is the QIDI Q3D deposit refundable?
Yes. The deposit is fully refundable at any time, for any reason, back to your original payment method, with no fees. It is a virtual credit, so no shipping address is needed when you pay it. The credit is valid for the Q3D only and cannot be transferred, split or cashed out.
The second step is where buyers can get caught out. Once the printer is available, a balance link arrives by email, and you have 7 days from that notice to pay. Miss it and you get a reminder. After that, the order may be cancelled with the deposit refunded.
QIDI Q3D release date and shipping time
There is no ship date. QIDI’s only estimate is about three months after order placement and payment completion. Buyers are promised a notice if that slips.
QIDI does not define payment completion. The balance link only arrives once the printer is available, so if the three-month clock starts at full payment, a deposit placed in November may not put a printer on your bench by mid-February.
QIDI Q3D specs
| Spec | QIDI Q3D (official) |
|---|---|
| Printer type | Enclosed CoreXY with a main hotend and an auxiliary hotend |
| Build volume, main nozzle | 260 × 260 × 260 mm |
| Build volume, auxiliary or dual nozzle | 240 × 260 × 255 mm |
| Max hotend temperature | 350°C, quick-swap main hotend |
| Max bed temperature | 120°C |
| Chamber heating | Gen-4 active heating, up to 70°C |
| Bed leveling | Eddy current sensor in the hotend |
| Motion | CoreXY, X-axis linear rail, 10 mm linear shafts and screws on Z |
| Max speed and acceleration | 600 mm/s, 20,000 mm/s² |
| Nozzle | Quick-swap bimetal, 0.4 mm (0.2, 0.6, 0.8 mm optional) |
| Extruder | Direct drive, hardened steel dual gears, Extruder Thermal Monitor |
| Extruder cooling | Optional, needs the Polar Cooler accessory |
| Air filter | G3 pre-filter, H12 HEPA, coconut shell activated carbon |
| Screen and storage | 4-inch 800 × 480 touchscreen, 64 GB eMMC |
| Connectivity | Dual-band Wi-Fi, USB |
| Size and weight | 500 × 488 × 558 mm, 29 kg net |
| Rated power (as listed) | 220 VAC: 1200 W + 280 W chamber heating; 110 VAC: 300 W + 280 W chamber heating |
| Slicers | QIDI Studio; PrusaSlicer and Orca with some advanced features possibly unsupported |
Each hotend has its own nozzle and its own temperature, so one print can mix two materials, such as PETG with a dedicated support filament. The auxiliary hotend handles PLA (except PLA Aero), PETG, ABS, ASA, TPU 64D, PA, PC, PVA and QIDI’s support filaments. PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU 64D and PA/PET support belong on the main hotend.
Separate extruders and filament paths reduce the purging and temperature changes needed when a print switches materials. QIDI also claims 40% faster printing than traditional dual-color printing, plus a drone-mount example with 41% less material and 52% less print time than a conventional dual-nozzle setup. No test conditions are given.
One spec-sheet footnote is easy to miss. With the filament cutter fitted, a 5 × 17 mm patch at the lower left of the bed and an 11 × 17 mm strip on the right are non-printable by default. Removing the cutter frees the full plate.
QIDI Q3D build volume with two nozzles
The full 260 × 260 × 260 mm cube is for the main nozzle. Prints that use the auxiliary nozzle, or both nozzles together, get 240 × 260 × 255 mm, which is 20 mm less in width and 5 mm less in height.
One QIDI FAQ answer comparing the Q3D with the Q2 lists the full volume for dual-nozzle printing, but the spec sheet and the print size FAQ both give 240 × 260 × 255 mm. If a two-material part is close to 260 mm wide, plan around 240.
Is the Polar Cooler included with the QIDI Q3D?
No. The standard Q3D does not include it. QIDI’s launch material credits active extruder cooling with cutting the risk of heat-related clogs by up to 90%, which reads like a built-in feature. On the Q3D, though, an extruder cooler is optional and requires the Polar Cooler accessory, recommended for large models and long runs with high-temperature or fiber-reinforced filament.
So treat the up-to-90% figure as a QIDI claim for a Q3D fitted with the optional Polar Cooler.
QIDI Q3D vs Q2
The Q3D adds a second hotend and a hotter chamber. Its main hotend tops out 20°C lower than the Q2’s, and its main-nozzle bed is smaller in X and Y.
| Spec | QIDI Q3D | QIDI Q2 |
|---|---|---|
| QIDI US store price (checked Nov 17, 2026, Pacific Time) | $599 list, $529 pre-order total | $449 ($499 regular); Q2 Combo $599 ($649 regular) |
| Multi-material | Main plus auxiliary hotend; QIDI Box support | Single hotend, multi-color through QIDI Box |
| Build volume | 260 × 260 × 260 mm (dual nozzle 240 × 260 × 255 mm) | 270 × 270 × 256 mm |
| Hotend limit | 350°C | 370°C |
| Chamber heating | Gen-4, up to 70°C | Gen-2, up to 65°C |
| Bed leveling | Eddy current sensor | Loadcell sensor |
| Storage | 64 GB eMMC | 32 GB eMMC |
| Screen | 4-inch, 800 × 480 | 4.3-inch, 480 × 272 |
The awkward comparison is price. On the day we checked, $599 was the Q3D’s list price and also the Q2 Combo’s current price with a QIDI Box included (regular $649). On the US store, the Q2 In Stock option is sold out. The Pre-Sale option charges the full $449 or $599 now and ships within 1 month of purchase. That is not the same as the Q3D’s $30 deposit and three-month estimate.
The Q2 Combo gives you more colors through one nozzle with purging between them. The Q3D gives you two materials, each with its own nozzle and temperature, which matters most for soluble or breakaway supports and for pairing a rigid filament with a flexible one.
QIDI Q3D vs Bambu Lab X2D and Flashforge Creator 5 Pro
Two enclosed multi-material printers from other brands sit close to the Q3D’s price. Bambu Lab’s X2D also uses a main and auxiliary nozzle. Flashforge’s Creator 5 Pro is a four-toolhead machine.
| Printer | US store price, Nov 17, 2026 (PT) | Multi-material |
|---|---|---|
| QIDI Q3D | $599 list; $529 pre-order total | 2 nozzles |
| Bambu Lab X2D | $589 sale, $649 regular | 2 nozzles |
| Bambu Lab X2D AMS Combo | $789 sale, $899 regular | 2 nozzles plus AMS |
| Flashforge Creator 5 Pro | $849 sale, $949 regular | 4 toolheads |
| Printer | Build volume | Chamber, nozzle |
|---|---|---|
| QIDI Q3D | 260 × 260 × 260 mm (dual 240 × 260 × 255 mm) | 70°C chamber, 350°C nozzle |
| Bambu Lab X2D | 256 × 256 × 260 mm (dual 235.5 × 256 × 256 mm) | 65°C chamber, 300°C nozzle |
| Bambu Lab X2D AMS Combo | Same as X2D | 65°C chamber, 300°C nozzle |
| Flashforge Creator 5 Pro | 256 × 256 × 256 mm | 65°C chamber, 320°C nozzle |
On paper the Q3D has the hottest chamber and the highest main-nozzle limit of the three. Only its main-nozzle area is slightly larger than the other two. For dual-nozzle jobs, its 240 mm width is smaller than the Creator 5 Pro’s 256 mm cube.
The X2D and Creator 5 Pro are listed as in stock today, while the Q3D is a deposit and a wait of several months. The Bambu and Flashforge prices are current sale prices and may move after Black Friday.
For nylon and other warp-prone engineering filaments, the 70°C chamber is the Q3D’s clearest advantage. Our guide to high-temperature nylon and carbon-fiber printers covers what chamber heat does for those materials, and our list of enclosed high-temperature 3D printers has older QIDI machines for context.
What QIDI has not announced about the Q3D
- A ship date. Only the three-month estimate exists.
- The Combo balance and total, and whether the $100 credit applies to the Combo.
- What QIDI BOX2 is. QIDI’s store has no BOX2 product page, and the Q3D FAQ refers to the QIDI Box.
- Test conditions behind the up-to-90% clog figure, the 40% speed claim and the 41% and 52% savings example.
- Why the 110 V rating (300 W plus 280 W for chamber heating) is so far below the 220 V rating. Check the label on your unit.
- Q3D-specific warranty terms beyond the store banner, which shows a 14-day no-reason return and 1-year coverage.
- An Amazon listing. None existed for the Q3D on November 17, 2026.
QIDI Q3D FAQ
Is the QIDI Q3D $499 or $529?
You pay $529 in total: a $30 refundable deposit now, then a $499 balance when QIDI emails the payment link.
Can I cancel a QIDI Q3D pre-order?
Yes. You can get the deposit back whenever you like, fee-free. Letting the 7-day balance window lapse can also end the order, with the money returned.
Does the QIDI Q3D work with the QIDI Box?
Yes. The Q3D supports the QIDI Box for filament tangle detection and can take up to four external boxes. The Combo comes with the QIDI BOX2.
Can the QIDI Q3D print nylon?
PA is on the auxiliary hotend’s supported list, and the 70°C chamber is aimed at nylon and other engineering filaments.
Does the QIDI Q3D work with OrcaSlicer?
QIDI Studio is the main slicer. PrusaSlicer and Orca also work, with a warning that some advanced features may not be supported. Our OrcaSlicer 2.5.0 RC coverage explains how Orca handles QIDI Box slots on current QIDI printers.
Is the QIDI Q3D on Amazon?
Not as of November 17, 2026. Pre-orders run through QIDI’s own store.








